Irrigation, Water Resources Engineering & Hydrology Mcqs Start Creating PDF
Irrigation, Water Resources Engineering & Hydrology Mcqs, this topic has 50 mcqs, It takes five to ten minutes to complete this free irrigation, water resources engineering & hydrology mcqs test. You will see 4 or 5 option of each question. You must choose / think only one option and then press on answer key for check right answer. Practice "irrigation, water resources engineering & hydrology mcqs" MCQs and share with your friends, brothers, sisters.
irrigation, water resources engineering & hydrology mcqs (Total Quiz: 50)
MCQ: If D is the depth of scour below original bed, then the width of launching apron is generally taken as________________?
- 1.2 D
- 1.5 D
- 2.0 D
- 2.5 D
MCQ: River training for depth is achieved by_______________?
- construction of dykes or leavees
- both (A) and (B)
- groynes and bandalling
MCQ: An aggrading river is a_________________?
- silting river
- scouring river
- both silting and scouring river
- neither silting nor scouring river
MCQ: The meander pattern of a river is developed by_________________?
- average discharge
- dominant discharge
- maximum discharge
- critical discharge
MCQ: If the R.L’s of canal bed level and high flood level of drainage are 212.0 m and 210.0 m respectively, then cross drainage work will be________________?
- syphon aqueduct
MCQ: The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called________________?
MCQ: Vertical drop fall is satisfactory for a height upto ___________?
- 0.5 m
- 1.5 m
- 3.5 m
- 5.0 m
MCQ: A straight glacis type fall with a baffle platform and a baffle wall is called_____________?
- vertical dropfall
- glacis fall
- Montague type fall
- inglis fall
MCQ: In a Sarda type fall, rectangular crest is used for discharge upto______________?
- 6 cumecs
- 10 cumecs
- 14 cumecs
- 20 cumecs
MCQ: The sensitivity of a rigid module is_______________?
- between zero and one